产品性能 Product Properties | 内控标准 Internal Control Standards | – |
---|---|---|
产品性能 Product Properties | ||
±10转 turns | 铜刺 Copper spikes | 无 None |
裂缝 Crack | 合计3cm以下 Total less than 3cm | |
剥离 Peel off | 合计3cm以下 Total less than 3cm | |
铜粉(mg)Copper powder | ≤5mg | ≤15mg |
±10转至扭断(转数)Turns until torsion (turns) | ≥30 没有不良喇叭口状或裂缝 Without any bell-shapes or cracks | ≥25 |
含氧量 (ppm) Oxygen content | 200-250 | ≤400 |
探伤数 Number of flaws detected | 大(L) | ≤1 |
中(M) | ≤3 | |
小(S) | ≤30 | |
探铁数 Number of iron detected | 大(L) | 0 |
中(M) | 0 | |
小(S) | 0 | |
伸长率(%)Elongation | ≥40 | ≥40 |
线径 Diameter | 8.0±0.2mm | 8.0±0.4mm |
电阻 Resistance | ≤0.01704 | ≤0.01707 |
氧化层(埃)Oxide layers | ﹤600 | – |
外观 Appearance | 表面光滑,无飞边、夹杂等缺陷 Smooth surface, no burr, no impurities or other flaws | 表面光滑,无飞边、夹杂等缺陷 Smooth surface, no burr, no impurities or other flaws |
生产状况 Production Condition | ||
卡炉 Blocks in the furnace | 无 none | – |
冷铜 Cold copper | 无 none | – |
汤温稳定性 Stability of copper water temperature | ±5℃ | – |
铸锭温度稳定性 Stability of ingot temperature | ±5℃ | – |
浇注状况 Casting condition | 液位无大幅度波动 Without significant fluctuations in the level | – |
其他 Others | 正常、稳定 Normal and Stable | – |